I see alot of trikes out there that have the gear lever poking out the side of the seat area or between the drivers legs…
The parking brake cables mounted in place and ready to have the front cable mounted. My plan is to have the “park brake” operated via…
Basically all i’ve done is removed the original Honda caliper then tapped the original mounting holes and fitted two heli coils to make them the…
For the exhaust i don’t have much room to play with and its right there in plain view so the trick is to fit a…
The front guard is now half mounted and will finish off the other half of the mounting another day. I also re shaped the brackets…
Although these need to be cleaned up and shaped a little better they are actually the pivot point which joins the rocker arm to the…
The triple trees i’m using allow for a 1 1/2inch OD fork tube which kinda limits me to the material i need to use. Mild…
I’m now up to the stage where i thought i better make a start on the front end. I’m going with the leading link design…
I now have both ends TIG welded up and the mounting brakets welded to it so that it can all be mounted using the original…
Due to me using the whole front end of the Honda it still has the steering rack in it so i have to lock up…