This is now the 2.5 litre G25a Honda motor not the noisy 2 litre one that I had in there previously. It’s nice and quiet and goes well.
Everything is all plumbed up and now also has a K&N filter added
Another aerial view of the motor. As you can see its quite a snug little fit . Because I previously had a 2 litre motor I had it all wired up using the 2 litre motor, the new motor had a different computer and slightly different gearbox so I took the 2.5 litre wiring loom off the motor and used the original 2 litre loom so that I can use the existing computer etc, the main difference was that this motor has knock sensors were as the original one didn’t, but that’s ok I don’t need knock sensors
.
The transmissions were slightly different too but it does bolt up to the original 2 litre trans as well other than 1 bell housing bolt doesn’t line up any more and the axles are slightly different